At 1.4 volts the batteries are questionable. Definitely not fresh. If I had a non functional product, especially one that is a power hog, I’ll toss those batteries.
This is wonderful! Marker on the power icon really worked well. Next time you might be able to explain how you knew where to solder second end of the repair wire.
Probably the main thing I find breaking on modern electronics is pc mounted jacks. On old amps, say Fender point to point wired guitar amps, the jacks were on a panel with wires coming off of them and the wires absorbed plug movement. On modern stuff the pc mounted jacks develop cracks. Typical examples are headphone and USB jacks. Happens left and right.
Had a Toshiba laptop years ago with this problem. We used the laptop for programing Motorola radios and adjusting the soft pots in them. Took less than 15min to troubleshoot and solder the plug. Took all day to figure out where a plastic brace went, that fell out when I opened.
I love this topic. I learn so much by watching people trouble shoot issues. My only comment is that it was hard to hear Phil’s reading the questions. Thanks again.
Hello Maam Limor Fried, Good day đ Maam, I know you have enough knowledge about Adafruit Ultimate GPS and I’m hoping maam you can help us please please please maam we really need your help PROMISE MAAM đ I’m begging help us maam please. My concern maam, Is it possible to send data to your mobile android from Adafruit Ultimate GPS Breakout getting the latitude and longitude then send to mobile android.. I mean, from the adafruit ultimate gps send data to mobile android so that the application from the android phone can detect the adafruit ultimate gps location from the given longitude and latitude. Is it possible maam ? if it is possible maam. Do you have a tutorial for that maam or a steps even a tutorial modules in how to send longitude and latitude to mobile phone by using adafruit ultimate gps.. Please Please Please maam we really really need your help maam. we are from philippines an IT Students and this project is part of our thesis maam huehue we really really need your help maam please help us. im begging maam please help us please please maam đ this is the one and only thing for our graduation this coming march maam our Thesis Project, please maam help us maam please I’m begging huehue we really need your help PROMISE MAAM WE REALLY NEED YOUR HELP. Please dont ignore us please maam huehue I’m begging maam please. Thankyou maam and I’m really hoping your response Maam Limor Fried.
I am pretty surprised you don’t have any vinegar… I use vinegar for cooking and for cleaning and even right now I have a fruit fly trap set up made with apple cider vinegar. For cleaning, I like that you don’t have to worry as much about it possibly destroying color like with bleach and it’s not too harsh. For harsh jobs, I actually have a big bottle of 30% concentrated hydrochloric acid… lets just say that makes cleaning the tub a breeze.
Thanks so much for this video! Another reason I love team adafruit! I have that exact label machine and I never thought the polarity could be backwards since as you said most everything on the planet is positive on the inside. and yes that thing eats batteries like a hummer eats gas. I believe the PS i found was a 3A supply, so that would explain it đ
cool video, any tips on how to get my feet wet to prepare for electrical engineering. Im pretty much a noob, but its inspiring to see other females in the field đ
Had fish tank LEDs lying around useless because they stopped working. This video motivated me to finally see what the problem was and it was just corrosion on the Ac-DC converter plug. Now it’s fixed!! Thank you so much!! :DDD
Great vid. Thank you. College teaches how to design & build but so few oportunities to learn fixing. No wonder it’s a "throw-away" world. Can’t count the times I said "I can fix that" only to see a quite puzzled face and be asked "… why? Don’t bother. I’ll just buy a new one. "
Can I make a suggestion? Repeat the question on-mic so the viewers don’t have to reverse-engineer it.
Great show. You should have used some hot glue to reinforce. Don’t know why you were against it. It’s temporary and adds some strength. True that epoxy would be best, but in a hurry or if you think you may want to take it back apart… hot glue.
I learned alot from this video!!! This inspired me to have a crack at an old remote with some broken pads where a cap used to be. I bodged in some wires and the cap and it WORKED! Next I moved on to my kid’s christmas toy that was already busted. I fixed that aswell! Yay!
Interesting video!
I had to fix an old vhs recorder and that wouldn’t work with the case open then I spotted a light sensor covered it with bluetack and it worked, then I fixed the dirty tape head.
Fixing household electronics 12/27/2015 – LIVE
http://www.instructables.com/id/Arduino-Thieve-Distractor-Alarm/
Baking soda works well removing battery corrosion, but for consumer electronics, IPA or Alcohol works too. I wouldn’t use sandpaper. NO
3 thumbs up fb yl
At 1.4 volts the batteries are questionable. Definitely not fresh. If I had a non functional product, especially one that is a power hog, I’ll toss those batteries.
man matar
Fixing household electronics is the best idea you’ve had in awhile run with it!
The tip negative is probably to sell power supplies.
please do more fixing normal household electronics.
Is this a one off or a new series? Would love to see it become a series…
This is wonderful! Marker on the power icon really worked well. Next time you might be able to explain how you knew where to solder second end of the repair wire.
Very good, 4 years ago when I started college I would make my beer and pizza money soldering students laptop power jacks and stuff like that haha
Probably the main thing I find breaking on modern electronics is pc mounted jacks. On old amps, say Fender point to point wired guitar amps, the jacks were on a panel with wires coming off of them and the wires absorbed plug movement. On modern stuff the pc mounted jacks develop cracks. Typical examples are headphone and USB jacks. Happens left and right.
what sources do you recommend for a beginner to learn electronics repair
You said you might not use hot-melt glue to support the jack after the repair. I use it quite often for just this sort of thing.
Had a Toshiba laptop years ago with this problem. We used the laptop for programing Motorola radios and adjusting the soft pots in them. Took less than 15min to troubleshoot and solder the plug. Took all day to figure out where a plastic brace went, that fell out when I opened.
You can also use a scouring pad to scrape the rust off of contacts.
What about baking soda and water paste …or is that for lead acid only?
Thanks for sharing this!
girl.. you’re talking more than dave jones đ but loved the video, keep them coming đ
90% of problems with electronics is the power supply.
I still have an old boombox that I had to re-solder the RCA jacks on several times because of the stress of plugging and unplugging things.
Priceless!!!
I love Ada’s side comments. One can learn so much.
Negative center power plugs are usually found on guitar pedals, too.
why not fix the center ground while it’s open
I love this topic. I learn so much by watching people trouble shoot issues. My only comment is that it was hard to hear Phil’s reading the questions. Thanks again.
Almost all guitar pedals are 9v centre negative
Two thumbs up!
I love this one. I’d love to see more like this!
What camera you are using for overhead
Hello Maam Limor Fried, Good day đ Maam, I know you have enough knowledge about Adafruit Ultimate GPS and I’m hoping maam you can help us please please please maam we really need your help PROMISE MAAM đ I’m begging help us maam please. My concern maam, Is it possible to send data to your mobile android from Adafruit Ultimate GPS Breakout getting the latitude and longitude then send to mobile android.. I mean, from the adafruit ultimate gps send data to mobile android so that the application from the android phone can detect the adafruit ultimate gps location from the given longitude and latitude. Is it possible maam ? if it is possible maam. Do you have a tutorial for that maam or a steps even a tutorial modules in how to send longitude and latitude to mobile phone by using adafruit ultimate gps.. Please Please Please maam we really really need your help maam. we are from philippines an IT Students and this project is part of our thesis maam huehue we really really need your help maam please help us. im begging maam please help us please please maam đ this is the one and only thing for our graduation this coming march maam our Thesis Project, please maam help us maam please I’m begging huehue we really need your help PROMISE MAAM WE REALLY NEED YOUR HELP. Please dont ignore us please maam huehue I’m begging maam please. Thankyou maam and I’m really hoping your response Maam Limor Fried.
https://youtu.be/joLgIulldbI?t=978 not
I am pretty surprised you don’t have any vinegar… I use vinegar for cooking and for cleaning and even right now I have a fruit fly trap set up made with apple cider vinegar. For cleaning, I like that you don’t have to worry as much about it possibly destroying color like with bleach and it’s not too harsh. For harsh jobs, I actually have a big bottle of 30% concentrated hydrochloric acid… lets just say that makes cleaning the tub a breeze.
wow someone else that fixes things. You could of also used baking soda to neutralize the acid
I found center Negative on Portable Cassette Players,Casio Keyboards and old electronics
Funny that it was labeled broken. O the irony. đ
Thanks so much for this video! Another reason I love team adafruit! I have that exact label machine and I never thought the polarity could be backwards since as you said most everything on the planet is positive on the inside. and yes that thing eats batteries like a hummer eats gas. I believe the PS i found was a 3A supply, so that would explain it đ
cool video, any tips on how to get my feet wet to prepare for electrical engineering. Im pretty much a noob, but its inspiring to see other females in the field đ
Had fish tank LEDs lying around useless because they stopped working. This video motivated me to finally see what the problem was and it was just corrosion on the Ac-DC converter plug. Now it’s fixed!! Thank you so much!! :DDD
Gosh, I love your face and brain.
Great vid. Thank you. College teaches how to design & build but so few oportunities to learn fixing. No wonder it’s a "throw-away" world. Can’t count the times I said "I can fix that" only to see a quite puzzled face and be asked "… why? Don’t bother. I’ll just buy a new one. "
Can I make a suggestion? Repeat the question on-mic so the viewers don’t have to reverse-engineer it.
More please!
Booster thingy? whaaaaâŠâŠâŠ..mmmmm.
What video mixer do you use?
MORE!!
Great show. You should have used some hot glue to reinforce. Don’t know why you were against it. It’s temporary and adds some strength. True that epoxy would be best, but in a hurry or if you think you may want to take it back apart… hot glue.
Lead free solder adds to this problem. Its not flexible and brittle. I always reflow with leaded solder when I repair electronics.
You might have reversed the connections while you were at it đ
Thanks for sharing, I love youuu !!!
This was so cool. You should pick stuff up at the thrift store and keep this going as a series!
I learned alot from this video!!! This inspired me to have a crack at an old remote with some broken pads where a cap used to be. I bodged in some wires and the cap and it WORKED! Next I moved on to my kid’s christmas toy that was already busted. I fixed that aswell! Yay!
Interesting video!
I had to fix an old vhs recorder and that wouldn’t work with the case open then I spotted a light sensor covered it with bluetack and it worked, then I fixed the dirty tape head.